• fr
  • en
Hydraulic Steering Systems

LHM Oil

2 Litre can LHM oil
2203721 2 Litre Oil Can LHM high performance
 

Dexron II Oil

2200017_huile_bidon_DexronII_2_litres
2200017 2 Litre Oil Can Dexron II
 
 

Pilot bored equipped tiller arm 32 ST 16

Pilot bored equipped tiller arm 32 ST 16 2202106_Pilot bored equipped tiller arm 32 ST 16_enc
2202106 Pilot bored equipped tiller arm 32 ST 16
  Ø 28 mm Pilot bored – Maxi Ø 50 mm

 


Pilot bored equipped tiller arm 40 ST 16

Pilot bored equipped tiller arm 40 ST 16 2201291_Pilot bored equipped tiller arm 40 ST 16_enc
2201291 Pilot bored equipped tiller arm 40 ST 16
  Ø 28 mm Pilot bored – Maxi Ø 50 mm

 


Pilot bored equipped tiller arm 50 ST 20

Pilot bored equipped tiller arm 50 ST 20 2201441_Pilot bored equipped tiller arm 50 ST 20_enc
2201441 Pilot bored equipped tiller arm 50 ST 20
  Ø 28 mm Pilot bored – Maxi Ø 50 mm

 


Quick Couplings

Quick Couplings
2201557 S/steel quick coupling ∅ 15
2201558 S/steel quick coupling ∅ 17

 


Energy Saving Device “Ecopilot”

The “Ecopilot” energy saving device was designed to meet the demand for electrical energy saving on sailing-boats. Power reserve on board is often very limited, however it is essential for the operation of an autopilot system.
The “Ecopilot” acts on the electro-valve which engages the autopilot. The power consumption of this electro-valve represents a major part of the total autopilot consumption.
Its action consists of letting through – during a short moment – the necessary current for the electro-valve to switch on. Then the current is significantly reduced but still sufficient to maintain the electro-valve in position.
Thanks to this system, the daily consumption of the electro-valve is reduced in average from 30Ah to 5Ah.
2202047_Energy Saving Device "Ecopilot"
2202047 Ecopilot 12 V
2202048 Ecopilot 24 V
 
Ecopilot
Power supply   12 or 24 VDC, 30 VDC max
Own Consumption   0.01 A
Output current at switching (Ie)   2.2 A max
Output current after switching   around Ie / 6.5
Switching time   0.2s
Protection   IP65
Indication d’alimentation   LED yellow
 Température d’utilisation    -20°C à +70°C

 


Maintenance Kits for Linear Drives

 
2202457 Maintenance kit for linear drives standard and Newave 32ST16 / 40ST16 -12 V
2202459 Maintenance kit for linear drives standard and Newave 32ST16 / 40ST16 -24 V
   
2202458 Maintenance kit for linear drives standard and Newave 40T254 / 50ST20 -12 V
2202460 Maintenance kit for linear drives standard and Newave 40T254 / 50ST20 -24 V
 
Maintenance kit for linear drives standard and Newave
kit_maintenance_electrodist 1202453 Electro-hydraulic clutch 12 V
1202454 Electro-hydraulic clutch 24 V
kit_maintenance_chape 1200387 Swivel yoke ∅ 15
1200436 Swivel yoke ∅ 17
kit_maintenance_platine 1200904 Brush holder + Brushes All types RV1 – RV2