Lecomble & Schmitt > Electro-Hydraulic Steering Systems “Steer-by-Wire” > Electro-hydraulic Steering Systems up to 500 kgm > Receivers: Cylinders / Linear Sensors
Receivers: Cylinders / Linear Sensors The cylinders provide the power of the steering system. They are selected by using the methods described in menu « Selection of the steering system ». All the cylinders are supplied with their pre-assembled and adjusted linear sensors. The linear sensor is supplied pre-wired with a pre-swaged connector half. VHM 40 DTP C234 + Linear Sensor/Reversed Linear Sensor 2203810 VHM 40 DTP C234 + Linear Sensor 2203811 VHM 40 DTP C234 + Reversed Linear Sensor Maximum torque 90 kgm 663 ft.lbs Stroke 228 mm 9″ Maximum pressure 50 bars 725 PSI Volume 215 cc 13.1 cu.in Radius of tiller arm 192 mm 7 9/16″ Total rudder angle 73° (2×36,5°) Weight 6,5 kg 14.3 lbs VHM 50 DTP + Linear Sensor/Reversed Linear Sensor 2203874 VHM 50 DTP + Linear Sensor 2203875 VHM 50 DTP + Reversed Linear Sensor Maximum torque 148 kgm 1091 ft.lbs Stroke 228 mm 9″ Maximum pressure 50 bars 725 PSI Volume 352 cc 21.5 cu.in Radius of tiller arm 192 mm 7 9/16″ Total rudder angle 73° (2×36,5°) Weight 7,5 kg 16.5 lbs VHM 60 DT + Linear Sensor/Reversed Linear Sensor 2203437 VHM 60 DT + Linear Sensor 2203876 VHM 60 DT + Reversed Linear Sensor Maximum torque 254 kgm 1873 ft.lbs Stroke 228 mm 9″ Maximum pressure 60 bars 870 PSI Volume 505 cc 30.8 cu.in Radius of tiller arm 192 mm 7 9/16″ Total rudder angle 73° (2×36,5°) Weight 18 kg 39.7 lbs
