• fr
  • en
Hydraulic Steering Systems

Tilt HB 5

2203559 Tilt HB5 2203559 Tilt HB5 - enc

Orientation Capacity
Possible orientation angle :  -24° to +24° (5 positions).

This product – the only one of its kind – is the most compact system on the market.
The hydraulic pump has been integrated directly into the tilt mechanism.

 
    Flow rate
2203658 Tilt HB 5 – 20 CT 20 cc / t
2203559 Tilt HB 5 – 26 CT 26 cc / t
2203659 Tilt HB 5 – 30 CT 30 cc / t
2203669 Tilt HB 5 – 35 CT 35 cc / t
2203670 Tilt HB 5 – 40 CT 40 cc / t
2203695 Tilt HB 5 – 50 CT 50 cc / t

Tilt HB 4

2203532_Tilt_HB4 2203532_tilt_hb4-enc
2203532 Tilt HB 4
 

Orientation Capacity
Possible orientation angle :  -18° to +27° (6 positions).

It is necessary to use a suitable pump with this system.
Available pump flow rates: 20 cc/t, 26 cc/t, 30 cc/t, 35  cc/t, 40 cc/t, 50 cc/t.

Please consult us for more information.

 


Tilt HB 3

2202655_tilt_hb3 2202655_tilt_hb3
2202655 Tilt HB 3
  Orientation Capacity
Possible orientation angle : -25° to +25° (5 positions)

This system can be fitted on pump types 20 HB, 26 HB, 30 HB, 35 HB, 40 HB, 50 HB.

 


Tie Rods for Outboard Steering

2202912_tie_rod
2202911 Tie Rod for Outboard Steering – Center distance between motors 450 – 650 mm
2202912 Tie Rod for Outboard Steering – Center distance between motors 650 – 850 mm
2202041-tie_rod
2202041 Tie Rod for Outboard Steering – Center distance between motors 470 – 710 mm*
2202102 Tie Rod for Outboard Steering – Center distance between motors 710 – 940 mm*
2202103-tie_rod
2202103 Tie Rod for Outboard Steering – Center distance between motors 580 – 810 mm*
To be fitted with 1 VHM EX 350 HP or 1 VHM EX 3500 HP
2202123_tie_rod
2202123 Tie Rod for Outboard Steering – Center distance between motors 650 – 880 mm*
To be fitted with 2 VHM EX 350 HP or 2 VHM EX 3500 HP
2203756 tie rod
2203756 Tie Rod for Outboard Steering – Center distance between motors 600 – 820 mm*
To be fitted with1 VHM EX 125/175/225 HP
 
* Allow the tilting of one motor independently of the other one

 


Fill and Bleed Power Pack “LS SPEEDY PURGE”

2203593 LS Speedy purge
2203593 Speedy Purge
  LS SPEEDY PURGE is a tool designed to fill and purge air from LS Hydraulic Steering Systems fitted on 5 to 15 metre boats.
LS SPEEDY PURGE connects directly to the 12 volt boat battery with crocodile clips and to the cylinder and pump with 2 x 4 metre clear spiral hoses.
Easily transportable, its 4 litre oil contents gives sufficient autonomy to bring 2 to 3 steering systems into service without filling up.
Fill and purge is done neatly by one technician alone in less than 10 minutes, thus ensuring that SPEEDY PURGE is paid off with the very first steering systems. LS Speedy Purge is the ideal tool for shipyards with small series of boats or for installation or maintenance work at marinas.
   
  Discover how it works in this short video!
 

 


Steering Oil

2200017_2 Litre oil can Dexron II
2200017 2 Litre oil can Dexron II
 

2203045_20 Litre oil can white oil ISO 22
2203045 20 Litre oil can white oil ISO 22
2203201 20 Litre oil can Dexron II
 

 


Adapter Kit for Honda Motors

Adapter kit for Honda Motors Adapter kit for Honda Motors - Schéma
2203671 Adapter Kit for Honda Motors
 

Lecomble & Schmitt has developed a kit for mounting its hydraulic steering cylinders for outboard motors on HONDA 115, 135 and 150 HP motors.

This kit makes it possible to integrate LS cylinders type VHM EX 125, 175 and 225 HP easily, without specific tools or modifications.


Pump Bezel

 2201058_Pump_Bezel  2201058_pump-bezel_mounting
2201058 Pump Bezel

 

 

Bulkhead Strain Relief

 
2201753 Bulkhead Strain Relief
  Suitable for all LS flexible tubes and all other flexible tubes with an outer diameter of 8 to 12 mm. Bulkhead Strain Relief

Sets of Fittings for Flexible Tubes

2201989 Set of elbow fittings flexible tube – pump G1/8 Ø6
2202115 Set of elbow fittings flexible tube – pump G1/8 Ø8
  2201989 Set of elbow fittings flexible tube

2200807 Set of straight fittings flexible tube – pump G1/8 Ø6
2202723 Set of straight fittings flexible tube – pump G1/4 Ø8
  2200807_Set _of_straight_fittings_flexible_tube

2200021 Set of adjustable elbow fittings flexible tube G1/4 Ø8
2200674 Set of adjustable elbow fittings flexible tube G1/4 Ø10
  2200021_Set_of_adjustable_elbow_fittings_flexible_tube

2200022 Set of elbow fittings flexible tube G1/4 Ø8
2200023 Set of s/steel elbow fittings flexible tube G1/4 Ø8
  2200022_Set_of_elbow_fittings_flexible_tube

2200123 Set of straight fittings flexible tube G1/4 Ø8
2200038 Set of s/steel straight fittings flexible tube G1/4 Ø8
2200068 Set of straight fittings flexible tube G1/4 Ø10
  2200123_Set_of_straight_fittings_flexible_tube

 


Sets of Straight Fittings for Inflexible Tubes

2200048 Set of straight fittings inflexible tube G 1/4 Ø10
2200089 Set of straight fittings inflexible tube G 3/8 Ø12
2200107 Set of straight fittings inflexible tube G 1/2 Ø18
  2200048_Set_of_straight_fittings_inflexible_tube

2200049 Set of fittings G 1/4 Ø 10 mm + tube lg 500 mm
2200096 Set of fittings G 3/8 Ø 12 mm  + tube lg 500 mm
2200109 Set of fittings G 1/2 Ø 18 mm  + tube lg 500 mm
  2200049_Set_of_straight_fittings_inflexible_tube

 


Sets of Tees Flexible Tubes

2200047 Set of tees – flexible tube Ø8
2200072 Set of tees – flexible tube Ø10
  2200047_Set_of_tees_flexible_tube

2200809 Set of tees – flexible tube Ø6
  2200809_Set_of_tees_flexible_tube

 


Fittings for Flexible Tubes

Steel S/Steel      
2200321 2200309 Elbow Fittings 90° G 1/4 conic JIC M. 9/16 Elbow Fittings 90°
2200426     G 3/8 conic JIC M. 9/16
1205997 1206365 Swivel Elbow Fittings G 1/4 cylindrique JIC M. 9/16 Swivel Elbow Fittings
1205894 1205656 Swivel Elbow Fittings JIC M. 9/16 – JIC F 9/16 Swivel Elbow Fittings
2200427 2200447 Straight Fittings G 1/4 conic JIC M. 9/16 Straight Fittings
2200199 2200448   G 1/4 cylindric JIC M. 9/16
2200428     G 3/8 conic JIC M. 9/16
2200429 2202039   G 3/8 cylindric JIC M. 9/16
2200430   Adaptaters G 1/4 conic JIC F.T. 9/16 Adaptaters
2200356     G 3/8 conic JIC F.T. 9/16
2200288   Connection Fittings JIC M. 9/16 Connection Fittings
2200431 1203946 Tee Fittings G 1/4 conic 2 x JIC M. 9/16 Tee Fittings
2200432     G 3/8 conic 2 x JIC M. 9/16
2200433 2202009 Equal Tee Fittings JIC M. 9/16 Equal Tee Fittings
2201566   Swivel Tee Fittings Rotatable JIC M. 9/16 Swivel Tee Fittings
2200299 2200449 Straight Fittings JIC M. 9/16 inner diam. 8 Straight Fittings
2200301     JIC M. 9/16 inner diam. 10
2200302   Elbow Fittings JIC M. 9/16 inner diam. 8 Elbow Fittings
2200303     JIC M. 9/16 inner diam. 10
2200373   Connection Fittings Inner diam. 8 Connection Fittings
2200434     Inner diam. 10

Fittings for Inflexible Tubes

Steel S/Steel      
2200435   Straight Fittings
G 1/4 cylindric diam. 8  2200435_Straight_Fittings
2200436     G 1/4 cylindric diam. 10
2200437     G 3/8 cylindric diam. 10
2200438     G 3/8 cylindric diam. 12
1203905 1205517   G 3/8 cylindric diam. 15
2200439     G 1/2 cylindric diam. 18
2200388     G 1/2 cylindric diam. 21
2200440   Elbow Fittings
G 1/4 conic diam. 10  2200440_Elbow_Fittings
2200306     G 3/8 conic diam. 12
1204618     G 3/8 conic diam. 15
2200441     G 1/2 conic diam. 18
1202330     G 1/2 conic diam. 21
2200442   Tee Fittings
G1/4 conic diam. 10  2200442_Tee_Fittings
2200443     G 3/8 conic diam. 12
2200339     G 3/8 conic diam. 18
2200339     G 1/2 conic diam. 18
2201543     G 1/2 conic diam. 21
2200469   Connection Fittings
Diam. 10  2200469_ Connection_Fittings
2200585     Diam. 12
1206228 1205518   Diam. 15
2200270     Diam. 18
2201303     Diam. 21
2200444   Equal Tee Fittings
Diam. 8  2200444_Equal_Tee_Fittings
2200259     Diam. 10
2200445     Diam. 12
1204627 1206521   Diam. 15
2200446     Diam. 18
2201545     Diam. 21
1204516   Swivel Tee Fittings
Diam. 10 Swivel_Tee_Fittings
1202634     Diam. 12
1202635     Diam. 18
1202438   Reductions G 1/8 M – G ¼ F  1202438_reduction
2200390 1206522   G 1/4 M – G 3/8 F
2200389 2200859   G 1/4 M – G 1/2 F
2200374 1203268   G 3/8 M – G 1/4 F
2200396 2200858   G 3/8 M – G 1/2 F
2200221     G 1/2 M – G ¼ F
2200332     G 1/2 M – G 3/8 F

Flexible Tubes for crimp connections

Only the sole use of LS flexible tubes in Ø6, Ø8 or Ø10 mm will guarantee the global performances and safe use of LS Steering Systems.
2200810 Ø6 Flexible tube per metre  Flexible tubes for crimp connections
2200024 Ø8 Flexible tube per metre
2200070 Ø10 Flexible tube per metre
   
1204267 Ø6 Flexible tube – length 8 m
1204268 Ø6 Flexible tube – length 10 m
1204740 Ø6 Flexible tube – length 12 m
1204985 Ø6 Flexible tube – length 25 m
1205301 Ø6 Flexible tube – length 35 m
1205359 Ø6 Flexible tube – length 400 m
   
1204825 Ø8 Flexible tube – length 10 m
1204742 Ø8 Flexible tube – length 12 m
1205245 Ø8 Flexible tube – length 20 m
1205300 Ø8 Flexible tube – length 35 m
1205360 Ø8 Flexible tube – length 400 m

 


Flexible Tubes with pre-crimped Fittings + Bulk Strain relief

1290502 Flex. tube with pre-crimped fittings – lg 5 m 1290503_Flexible_tube_with_pre-crimped_fittings
1290503 Flex. tube with pre-crimped fittings – lg 6 m
1290610 Flex. tube with pre-crimped fittings – lg 6.5 m
1290504 Flex. tube with pre-crimped fittings – lg 7.5 m

 


Steering Wheels

2200181 Plastic Wheel ∅ 320 2200181 Plastic Wheel ∅ 320
2200181 Plastic Wheel Ø 320

2200182_Imitation_Leather/Anodised_Alu_diam_320 2200182_Imitation_Leather/Anodised_Alu_diam_320
2200182 Imitation Leather/Anodised Alu Ø 320

2202462_LS_S/Steel_Wheel_with_Knob_275 2202462_LS_S/Steel_Wheel_with_Knob_275
2202462 S/Steel Wheel with Knob Ø 275

2203376_LS_S/Steel_Wheel_320 2203376_LS_S/Steel_Wheel_320
2203376 S/Steel Wheel Ø 320

2202464_LS_Covered S/Steel_with_Knob_340 2202464_LS_Covered S/Steel_with_Knob_340
2202464 Covered S/Steel with Knob Ø 340

2200985_LS_S/Steel_Wheel_350 2200985_LS_S/Steel_Wheel_350
2200985 S/Steel Wheel Ø 350

2203377_LS_Covered_S/Steel_Wheel_360 2203377_LS_Covered_S/Steel_Wheel_360
2203377 Covered S/Steel Wheel Ø 360

2200986_LS_S/Steel_400 2200986_LS_S/Steel_400
2200986 S/Steel Ø 400

Tools for assembling and disassembling LS Cylinders

For Cylinders fitted with Clips

Tools for assembling/disassembling LS cylinders
2201348 for Cylinders VHM 226
2201349 for Cylinders 28 ST HB, 28 ST HBR, 28 ST HB AS, 28 ST HB DT
2200598 for Cylinders 32 ST HB, 32 ST HBV, 32 ST HBM

For Cylinders of "EX" series

Tools for assembling/disassembling LS EX series cylinders
2202648 for Cylinders VHM EX 75 HP, EX 80 HP
2203392 for Cylinders VHM EX 125 HP, EX 150 HP, EX 281
2203193 for Cylinders VHM EX 175 HP, EX 225 HP
2202863 for Cylinders VHM EX 350 HP, EX 3500 HP

Separators without Filter

For decanting and separating condensation water in tanks, these environment-friendly fuel-water separator without filter are compatible with all petrol and diesel-oil fuels containing ethanol. Specifically designed for outboard motors, these fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual. Nature-friendly, they are fully recyclable and are already widely successful. They have been patented and are distributed by Lecomble & Schmitt.

2203322_filter_DSC1-0
2203322 Filter DSC 1.0
  Fuel-water separator specifically designed for outboard motors from 4hp to 45hp, DSC1.0 fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual.
2203103_filter_DSC1
2203103 Filter DSC 1
  Fuel-water separator specifically designed for outboard motors from 45hp to 300hp, DSC1 fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual.